You may download firmware from our web site (two are available in Firmware Pack at this moment),Ĭopy it to the MicroSD card, and change the type of your display in a minute! The MicroSD slot is intended for firmware upgrades. The user can turn off unused data pages and choose preferred units. On the actual device, a user can slide data pages very fast using the two buttons on the side of the Display. You will not be able to configure wind or depth sensors from our Display, but you will get the same readings as you would onīelow you can slide through the Display's screens with "Instrument Display" firmware: Our Display is a practical choice as an additional instrument display, mounted Unlike budget displays which usually perform one function (wind only, or speed only, etc.) our Display Our Display costs $149 USD and typically requires only 20 mA. Modern instrument displays costs $500-$1000 USD and require 150-200 mA of electricity. This product is no longer available for orderīeautiful graphics cost money. The vessel's trim tabs, four batteries, four diesel and four gasoline tanks and three fresh water and three black water tanks. With other firmware, you can monitor up to four engines and transmissions, temperature in the exhaust system, Log and trip distance, engine revolutions, batteries voltage, etc. It shows the vessel's position, course and speed, wind and weather data, water depth, Instrument display for NMEA 2000 networks.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |